Shop Categories
CNC & Engraving
3D Printing
- — 3D Printers
- — Filaments
- — TPU
- — PLA
- — PETG
- — Wood
- — More Filaments
- — Resins
- — Accessories
Tools & Instruments
- — Soldering
- — Oscilloscopes
- — Repair Tools
- — Others
Explore
-
![2/4/8-Channel 5V Relay Module]()
207 reviews2/4/8-Channel 5V Relay Module
- 5V 2/4/8-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP431, TTL logic)
- Indication LED's for Relay output status
$72.00$56.00SAVE $16.00
-
![Mega 2560 R3 ATmega2560-16AU, Arduino Compatible]()
71 reviewsMega 2560 R3 ATmega2560-16AU, Arduino Compatible
This is the new Arduino compatible Mega 2560 R3. The new ATMega16U2 chip allows for faster transfer rates and more memory. No drivers needed for Linux or Mac
- Adds SDA and SCL pins next to the AREF.
- Two new pins are placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes
- Works with all existing shields but also compatible with new shields that require the additional pins.
$166.00$135.00SAVE $31.00
-
![Ultrasonic Ranging Detector Mod HC-SR04 Distance Sensor]()
317 reviewsUltrasonic Ranging Detector Mod HC-SR04 Distance Sensor
- Using IO trigger for at least 10us high level signal
- The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back
- IF the signal back, through high level ,time of high output IO duration is the time from sending ultrasonic to returning. Test distance = (high level time velocity of sound (340M/S) /2
- Power supply :5V DC, quiescent current : <2mA,effectualangle: <15 ranging distance : 2cm~400 cm resolution : 0.3 cm
$79.00$48.00SAVE $31.00
-
![All Colors, TPU Flexible Filament 1.75mm 0.8kg/1.76lb]()
497 reviewsAll Colors, TPU Flexible Filament 1.75mm 0.8kg/1.76lb
Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 200 - 220°C; Recommended platform temperature: 40 - 60°C
TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible
Compatible with all FDM printers on the market which accept 1.75 mm filament; Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers
With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp
Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.
- Buy Two Together to Get Free Shipping in US.
- Nylon+ Carbon Fiber | Silk PLA | PETG | Neon Color TPU | Filament Storage Bag
$253.00$237.00SAVE $16.00
-
![ToolPAC PRO32 Smart Soldering Tool Set with Power Supply]()
120 reviewsToolPAC PRO32 Smart Soldering Tool Set with Power Supply
Rapid Warmup: With the help of dual temperature sensors, the internal heating element reaches its operating temperature extremely fast—just 12 seconds! The tip temperature can be set between 212° F and 752° F (100° C to 400° C) using the adjustment buttons and OLED display.
New Power Supply Design: The Pro32 features an integrated DC5525 12-24V connection. Its anti-static design isolates the temperature sensors from extraneous surges.
Tough & Portable: The sleek, slim design is comprised of an SAE 304 stainless steel core, housed inside a polycarbonate shell with an easy-to-read OLED display.
Smart & Safe: The integrated STM32 processor chip automatically regulates the Pro32’s “sleep mode”, “standby”, and “operating mode”, ensuring the safety of the user.
Space-saving: It is small and lightweight, so it will not occupy much space on your workbench. You can easily carry it around in your pocket to perform some soldering jobs on the field.
Soldering iron tips are easy to assemble or disassemble, and replaceable for PR-BC2.
YOU MAY ALSO LIKE: Upgraded TS80P Portable Soldering Iron Kit
$711.00
-
![SainSmart DSO212 2-CH Handheld Mini Digital Oscilloscope]()
73 reviewsSainSmart DSO212 2-CH Handheld Mini Digital Oscilloscope
DS212 is a 2-channel digital oscilloscope. It is in a new design - two gear for controlling, very convenient for testing. It supports USB flash disk storage and USB charging. It is widely applicable in the academic experiment, electronic maintenance, electronic engineering tasks, etc.
- New design - two gear for controlling, very convenient for testing.
- Pocket-size and lightweight.
- Chargeable lithium battery, 4 hours' working duration.
- Equipped with a 320*240 color display.
$869.00$790.00SAVE $79.00
-
![SainSmart x Creality Ender-3 3D Printer]()
267 reviewsSainSmart x Creality Ender-3 3D Printer
Semi-Assembled & Cost Effective By eliminating the high retail markup, SainSmart is able to offer a sensible package with unrivaled quality in the entry-level space.
High Precision & Noiseless The CNC-machined Y-axis mounting slot ensures highly precise positioning of the printer head. V-slot POM (polyoxymethylene) wheels allow the nozzle to glide smoothly and silently.
No Clogging or Warping Our patented extruder design greatly reduces the risk of a clogged nozzle. There’s no need for printing tape or glue due to the incorporation of a new viscous platform sticker.
Fast Heating & Resume Print Feature The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
Tips: Frequently Bought With Tempered Glass Heated Bed & SainSmart PRO-3 PLA Filament To Get The Best Printing Experience.
Simplify3D, works with Windows, Mac, and Linux operating systems. Supports .STL and .OBJ file formats
$1,573.00$1,391.00SAVE $182.00
-
![SainSmart Genmitsu CNC Router 3018-PRO DIY Kit]()
285 reviewsSainSmart Genmitsu CNC Router 3018-PRO DIY Kit
3-Month Carveco Maker Subscription Is Included (a $45 Value) ☛ Subscribe to receive
Get started with industry-leading CAM design software with a free 3-month subscription. Design V-Carve paths and 3D Engraving right out of the box.
Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle no need to modify G-code to ramp up to full speed and also supports the Genmitsu 3018 PRO Laser.
V2 CNC Control Board: GRBL 1.1F, Frosted Clear ABS Enclosure, Upgraded Drivers reduce heat and improved spindle power performance. Short Circuit Protection with Fault Indicator LED. Improved USB Port - Stronger than before. The new component layout provides higher stability performance.
Controller Software: The Genmitsu 3018-PRO uses Grbl, high-performance open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck. Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files.
Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
$2,126.00$1,573.00SAVE $553.00
-
![SainSmart Genmitsu CNC Router 3018-PROVer Kit]()
178 reviewsSainSmart Genmitsu CNC Router 3018-PROVer Kit
3-Month Carveco Maker Subscription Is Included (a $45 Value). Subscribe newsletter to receive the link.
- The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
- The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for an immediate shutdown of your machine.
- Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.
- Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
$2,757.00
-
![Genmitsu PROVerXL 4030 CNC Router with Carveco Maker Subscription]()
38 reviewsGenmitsu PROVerXL 4030 CNC Router with Carveco Maker Subscription
The Genmitsu PROVerXL 4030 Benchtop CNC machine is a new class of easy to assemble and ready to go kits. It's great for an endless variety of cutting, drilling, and carving operations on a variety of materials including wood, MDF, plastics, foams, vinyl, and aluminum.
Take your creativity to the next level working with REAL materials and the Genmitsu PROverXL 4030 Desktop CNC.6060 Extension Kit & 6060 Aluminum Spoilboard are available now.
- Please do not update the firmware, it will make the control board operate incorrectly.
- This product is excluded from all promotions and discount codes.
$7,892.00
-
![3040 Y-Axis Extension Kit for 3018 Series CNC Router]()
54 reviews3040 Y-Axis Extension Kit for 3018 Series CNC Router
Super Size your CNC: This kit will extend your CNC’s Y-Axis to have 370mm of movement (14.6”), 320mm of travel, easily convert your 3018 to a 3040.
Compatibility: Perfectly compatible with Genmitsu 3018-PRO, 3018-MX3, 3018-PROVer, 3018-PROVer Mach3 CNC’s.
Built to suit your needs: It is designed to be a direct upgrade to the 3018 series CNC machines. The enlarged 3040 MDF Spoilboard and 3040 Aluminum Spoilboard are available now.
Simple Assembly: We will take you through the assembly process every step of the way.
Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend tons of money on a bigger one.
Note for Bakelite 3018-MX3 User: Please check the screw hole of the optical shaft part.
COUNTERBORE in the screw hole: ▶ 3018-PROVer Series SPOTFACE in the screw hole: ▶ 3018-PRO $474.00
-
![Creality Ender-3 V2 FDM 3D Printer]()
32 reviewsCreality Ender-3 V2 FDM 3D Printer
The Best Value just got better. The Ender-3 V2 has the same 220 x 220 x 250 mm build volume as its predecessor; that's more reliable and easier to use.
Enhanced Durability and all-metal frame provide the extra rigidity you need for consistently great prints.
Upgraded power supply. Equipped with a new Meanwell power supply that delivers stable and consistent power for the best performance.
Simple & Clear UI: redesigned for a better out of box experience.
No Limits on your creativity - Compatible with most 3D Printer filaments, giving you the flexibility to create what you want.
Simplify3D, works with Windows, Mac, and Linux operating systems. Supports .STL and .OBJ file formats
YOU MAY ALSO LIKE: CR Touch Auto Leveling Kit
$2,370.00$2,212.00SAVE $158.00
-
![BIQU B1 FDM 3D Printer]()
8 reviewsBIQU B1 FDM 3D Printer
32-bit Board with TMC2225 Silent Drivers
BIQU B1 has a SKR V1.4 32-bit mainboard, in combination with the silent TMC2225 stepper drivers, this printer will deliver quiet and consistent results time after time.
Quality Printing
The all-metal extruder on the BIQU B1 enables smooth extrusion and longevity, in combination with the dual fan cooling duct to produce quality prints. Print area 235 x 235 x 270 mm
Spring Steel Bed
The B1’s spring steel bed has a textured surface, which allows for excellent bed adhesion and easy removal of prints. The bed is also reversible, so that printing can be done on both sides, prolonging the service life.
A 3D Printer for Beginners and Experts
With a 4.3-inch color touchscreen and dual user interface, the B1 offers some beginner-friendly features for easy calibration and setup, as well as countless features for advanced users to get most out of their printer!
More options for upgrades
The BIQU B1 offers extra connection slots and interfaces for you to upgrade the printer with ease. No firmware update needed! It supports adding BL-Touch, WiFi connectivity, and the BTT Smart Filament Sensor.
- YOU MAY ALSO LIKE: BLTouch Auto Bed Leveling Sensor Kit | BIQU H2 Extruder | SKR Mini E3 V2.0 Silent Control Board
$2,355.00$2,047.00SAVE $308.00
-
![CNC Blue-Violet Light Fixed Focus Laser Module Kit, For 3018-PROVer, LE5040]()
23 reviewsCNC Blue-Violet Light Fixed Focus Laser Module Kit, For 3018-PROVer, LE5040
Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This module is only compatible with 3018-MX3/3018-PROVer, but not compatible with 1810-PRO/3018/3018-PRO.
Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.
Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.
Excellent Heat Dissipation: Equipped with a large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.
Industrial Grade Design: It is designed for industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring reliability, high stability, high efficiency, low noise, and excellent laser beam quality.
YOU MAY ALSO LIKE: Laser Module for Genmitsu 3018-PRO
$1,264.00
-
![SainSmart x Creality Ender-3 PRO 3D Printer]()
11 reviewsSainSmart x Creality Ender-3 PRO 3D Printer
Creality Ender-3 PRO is an upgraded version of Ender-3, comes with MeanWell power supply and new platform sticker, also redesigned the aluminum extrusion. A new state of the art "C-MAG" magnetic sticker is designed for Ender-3 PRO, it is completely removable, flexible and can better adhere to the platform. We adopt the Meanwell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
Simplify3D, works with Windows, Mac, and Linux operating systems. Supports .STL and .OBJ file formats
YOU MAY ALSO LIKE: CR Touch Leveling Kit | Monitoring Smart Kit
$1,865.00$1,628.00SAVE $237.00
-
![SainSmart Upgraded TS80P Portable Soldering Iron Kit]()
12 reviewsSainSmart Upgraded TS80P Portable Soldering Iron Kit
Upgraded Version
TS80P is the upgrade version of TS80 Portable Soldering Iron. It is powered by USB Type-C interface and PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with the PD2.0 (12V 3A)/QC3.0 (9V 2A) protocol.
Faster Heating
The output power of TS80P has been increased from 18W to 36W max. It can heats up in only 8s from room temperature to 572℉(300 ℃), which is 10s faster than TS80. It’s equipped with an OLED screen, you can monitor the status of the soldering iron at any time.
Smart & Safe
With a built-in STM32 chip, TS80P can smartly control the rise and fall of tip temperature, and features sleep, automatic power-off, safety protection and other modes. The code application layer is open source; you can develop firmware for the soldering iron freely as needed.
More Convenient
TS80P features a brand new easy-push tip fastener, which provides a best holding experience and an easy push to loosen the soldering tip for quick replacement.
Take-and-Go
TS80P has a simple, lightweight body that fits comfortably in the palm of your hand. It’s completely portable and suit your pockets. You can take it anywhere you want and use it while powered by a power bank.
- You May Also Like：TS-B02/TS-D25/TS-K4 Iron Tip | PRO32 Soldering Iron
$869.00$711.00SAVE $158.00
-
![Genmitsu 1/8]()
14 reviewsGenmitsu 1/8" Shank 40-PCS CNC Cutter Milling Carving Bit Set, MC40A
High Quality -- The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
Applicable Materials -- Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility --The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$277.00
-
![6060 XY-Axis Extension Kit for PROVerXL4030]()
5 reviews6060 XY-Axis Extension Kit for PROVerXL4030
Level up your CNC: This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making MORE.
Compatibility: Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board & MDF Board will also be available soon.
Flexible Extension: You could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs.
Simple Assembly: We will take you through the assembly process every step of the way. You could find the Installation Guide located in our at the resource center.
Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend more on complicated assembly.
$2,757.00
-
![Creality CR-6 SE Leveling-Free FDM 3D Printer]()
9 reviewsCreality CR-6 SE Leveling-Free FDM 3D Printer
Ease of Use: Much simpler assembly, plus with the auto bed leveling feature, this CR-6 SE brings you an unrivaled out of box experience to date.
A Quiet Beast: 32-bit silent motherboard, ATmega2560 control chip, and 24V 350W MeanWell power supply enable the CR-6 SE to heat up quickly and reduce noise consistently.
Professional Performance: Robust aluminum frame, dual lead screws and adjustable timing belt contribute to the smooth finish of the prints.
More Practical Add-ons: Flexible hotbed fixator, foldable filament holder, stepper motor cover...All you need is within reach.
Smooth Printing Experience: The newly-designed extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal. It is also equipped with the filament run-out sensor and resume printing function.
$3,389.00$2,994.00SAVE $395.00
-
![Genmitsu KABA Desktop CNC Enclosure]()
22 reviewsGenmitsu KABA Desktop CNC Enclosure
- Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO.
- Premium materials, modular design.
- Keep your workspace clean and reduce dust. Perfect for your desktop or workbench.
- Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
- Reduce Noise: Up to 21dB (99% reduction in loudness) quieter during operation, less volume than a normal conversation
- You May Also Like： KABA Lite CNC Enclosure
$948.00
-
![SainSmart 3D Printer Enclosure]()
3 reviewsSainSmart 3D Printer Enclosure
Stable and Consistent Printer Quality
The SainSmart enclosure reduces heat losses and prevents external factors that might alter your prints, delivering more consistent printing results.
Better Organize Your Printing Area
The enclosure has 3 tool pockets and 2 filament holders on the left side, and 4 tool slots plus another 2 filament holders on the right side. Small tools such as wrenches, screwdrivers and pliers can be easily organized, keeping your printing area clean and tidy.
Comprehensive Protection
Filaments can give out unfavorable fumes during the printing process. Using an enclosure makes it possible to contain the fumes and vent them outside when printing is done.
Noise & Dust Reduction
A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust.
Compatibility
With a large area measuring 73.5cm x 61.5cm x 53cm, this enclosure is compatible with most desktop 3d printers on the market such as Creality Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5, SainSmart Coreception 300 and so on. For even larger printers like the Ender-5 Pro, you may need to place the controller outside.
$790.00$632.00SAVE $158.00
-
![SainSmart Genmitsu CNC 3018-PRO Laser Machine Special Bundle Kit]()
11 reviewsSainSmart Genmitsu CNC 3018-PRO Laser Machine Special Bundle Kit
This Special Bundle Kit Includes
- Genmitsu CNC Router 3018-PRO ($270 value)
- 5.5W Blue Laser Module ($150 value)
- Genmitsu Offline Controller ($25 value)
- LightBurn GCode License Key($40 value)
- Nano Blue Router Bits Essential Kit($57 value)
- 3-Month Carveco Maker Subscription ($45 Value)
This is the latest version of CNC Router 3018-PRO, equipped with an all-new design controller board that provides better heat dissipation. Our new power adapter has been redesigned, with CE, FCC & PSE certifications, that ensures complete protection for you and your machines. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.
3-Month Carveco Maker Subscription Is Included (a $45 Value)
Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.
New Version
Genmitsu CNC Router PRO is an upgraded version of Genmitsu CNC Router. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
Integrated
With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
Software
The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.
Versatile
Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
Simple Assembly
Assembly instructions are provided, but if you get stuck, check out the SainSmart Resource Center or contact us with any questions that arise.
$3,832.00$3,555.00SAVE $277.00
-
![Genmitsu GS-775MR 24V 20,000 RPM Spindle + Collet Holder + Motor Noise Suppression, for 3018 Series]()
12 reviewsGenmitsu GS-775MR 24V 20,000 RPM Spindle + Collet Holder + Motor Noise Suppression, for 3018 Series
- DC: 24V. Speed: 20000/min. Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with Genmitsu 3018 Series CNC router.
- Double ball bearing brush. CW/CCW rotation.
- Ease Installation: With the collet holder installed, you don’t need to spend hours in installing the collet holder. Have a quick swap of the OEM Spindle.
If you are looking for a power source replacement motor for power tools, electric equipments and other DIY toys, please check this 775 motor.
$237.00
-
![Genmitsu LE5040 CNC Laser Engraver Machine]()
7 reviewsGenmitsu LE5040 CNC Laser Engraver Machine
High Efficiency Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.
Applicable Materials Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.
Large Working Area This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.
Excellent 5.5w Laser Module The laser module adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.
Software The LE5040 uses LaserGrbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.
Perfect compatible system Use LaserGRBL or Light.Burn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS and Linux.
$2,915.00$2,757.00SAVE $158.00
- 1
- 2
