Genmitsu Parts & Accessories – SainSmart.com

Genmitsu Parts & Accessories

Sort:

New

VIEW MORE
2PCS T-Track Mini Hold Down Clamp Kit, for wood working on PROVerXL 4030
- Application: Great upgrade from the standard clamps included with Genmitsu PROVerXL 4030 or CNC 3040 series and other DIY CNC’s. It can be used on the MDF spoildboard and the aluminum spoildboard that fits the size of the M6 T-slot nut (16 x 16mm).
- Dimensions: 99mm length x 20mm width x 70mm height. (3.9 x 0.8 x 2.8in)
- Working range: The clamp accommodates materials up to 50mm (1.97'') thick and features easy to tighten knobs for quick installation or removal of stock material.
- Sturdy Quality: Constructed of High Strength 6061 Aluminum Alloy with high durability and wear resistance.
- Versatility: Spring loaded and capable of exceptional clamping force, this is a perfect addition to any universal t-track system configuration or assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
$198.00

New

VIEW MORE
CNC Dust Shoe ABS Cover Cleaner, for 3018 Series CNC Router Φ42mm Spindle Motor
This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
- US orders will be shipped at the end of Augst.
- Other countries and regions will be shipped in the early of Sept.
$158.00

New

VIEW MORE

CNC MDF Spoilboard with Scale Grid for 3018 CNC Router

This MDF spoilboard is redesigned with scale 1-cm grids and 24 holes to fit most sizes of clamps, which is flexible for your configuration. The size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in), it is compatible with most 3018 CNC routers on the market. (eg. Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3)

A spoilboard is a disposable workbench mounted above the router’s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.

You May Also Like: Hold Down Clamps | Z-Axis Touch Probe | KABA Enclousre
US order estimate ship out in the middle of August.

$198.00

New

VIEW MORE
Vaccum Pump for CNC Aluminum Vacuum Table
With a strong pure copper motor, the vacuum pump works with high suction power and produces low noise. It has a long service life of about 1,000 hours. It can move air quickly and pulls a strong vacuum in no time.
- Quick Installation, the motor holder is included. The diameter of the holder screw hole is 23mm.
- Easy maintenance, no lubricant required and it will not pollute the environment.
- Compatible with Genmitsu CNC Aluminum Vacuum Table perfectly. Also, it is suitable for most DIY projects or vacuum adsorption automation equipment.
You May Also Like: KABA CNC Enclosure | 300W Spindle Motor | Aluminum Spindle Holder
$316.00

VIEW MORE
[Replacement] Limit Switches (XY) for 3018-PROVer
- Original Limit Switches (XY) for Genmitsu 3018-PROVer.
- More replacements are available here.
$48.00

VIEW MORE
[Replacement] Limit Switches (XY) for 3018-PROVer
- Original Limit Switches (XY) Collet for Genmitsu 3018-PROVer.
- More replacements are available here.
$48.00

VIEW MORE
[Replacement] ER11 1/8'' Collet for 3018-PROVer
- Original ER11 1/8'' Collet for Genmitsu 3018-PROVer.
- More replacements are available here.
$32.00

VIEW MORE
[Replacement] Clamp Set for 3018-PROVer
- Original Clamp Set for Genmitsu 3018-PROVer.
- More replacements are available here.
$48.00

VIEW MORE
[Replacement] Stepper Moter Cable & Spindle Cable for 3018-PROVer
- Original Stepper Moter Cable & Spindle Cable for Genmitsu 3018-PROVer.
- More replacements are available here.
$79.00

VIEW MORE
[Replacement] Limit Switch Cables for 3018-PROVer
- Original Limit Switch Cables for Genmitsu 3018-PROVer.
- More replacements are available here.
$79.00

VIEW MORE
[Replacement] Acrylic Baffle for 3018-PROVer
- Original Acrylic Baffle for Genmitsu 3018-PROVer.
- More replacements are available here.
$158.00

New

VIEW MORE
CNC Aluminum Vacuum Table for 3018-PROVer Series
The vacuum table is solid aluminum, which has high stability and excellent suction to help prevent warping. It is perfect for engraving thin materials or workpieces that require high precision.
No clamps are required when engraving so you avoid clamp/mount scratches and bumps that may be created by improper operations. Also, you could save your engraving material since you don’t need to set aside space for installing the clamps.
Works well with a properly sized vacuum pump. A perfect match Vacuum Pump is also available.
Easy to use, apply the suction tape to accommodate your stock material. We suggest you lay pieces of paper to cover the unused portion, then turn on the vacuum pump.
Perfectly compatible with Genmitsu 3018PROVer; 3018-PROVer mach3. You can use it to replace the original spoilboard of the machine.
You May Also Like: KABA CNC Enclosure | 300W Spindle Motor | Aluminum Spindle Holder
- Pre-order now, estimate ship out in the end of August.
$790.00

VIEW MORE
[Replacement] USB disk for Genmitsu 3018-PRO
- Original USB disk for Genmitsu 3018-PRO.
- More replacements are available here.
$79.00

New

VIEW MORE
6060 T-Slot Table Aluminum Spoilboard with Dust Baffles for PROVerXL 4030 XY-Axis Extension Kit
Compatibility: Compatible with 6060 XY-Axis Extension Kit of Genmitsu PROVerXL 4030.
Dust Baffle Included: This kit comes with two dust baffles, which keep the Y-frames on both sides clean to work properly.
High Quality: Made of high strength aluminum alloys. Strong and durable. Compared with MDF Spoilboard, the aluminum base can be used with a Coolant Mist System and will not expand.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoilboards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
You May Also Like: T-track & Threaded Hold Down Clamps | Bench Vise Clamp
- Early Bird 1st batch sold out, 2nd batch will be shipped in the middle of August.
$1,257.00

VIEW MORE
[Open Box] CNC 4-Axis Kit 6 with ST-4045 Motor Driver, USB Controller Card, Nema23 Stepper Motor and 36V Power Supply
- Comes with CNC USB port interface breakout board
- 4.5A ST-4045 stepper motor driver, ensure the stable operation of equipment
- 350W 36V switching power supply; the range of AC input voltage is changed by the switch
- 57HS76 stepper motor, powerful and stable to work.
- Easy to assemle, simply to DIY.
~~$2,370.00~~ $1,418.00
SAVE $952.00

VIEW MORE
[Replacement] 4-pin Motor Wire & Spindle Motor Wire for 3018-PRO
- Genmitsu 3018-PRO Original Motor Wire.
- More replacements are available here.
$79.00

VIEW MORE
[Replacement] Bakelite Plate for 3018-PRO, Back-Front, Left-Right
- Genmitsu 3018-PRO Original XY Axis Bakelite Plate.
- More replacements are available here.
$316.00

VIEW MORE
[Replacement] Aluminum Bed Engraving Platform，Nut Seat for 3018-PRO
- Genmitsu 3018-PRO Original Aluminum Bed.
- More replacements are avaiable here.
$316.00

VIEW MORE
[Replacement] X&Y Axis Aluminum Profile for 3018-PRO
- Genmitsu 3018-PRO Original XY Axis Aluminum Profile.
- More replacements are avaiable here.
$158.00

VIEW MORE

CNC Router Bits Collet Set, ER11-M, ER16-M, ER20-M

Durable Design: The collets are made of high-quality alloy spring steel material. High accuracy and it can be up to 0.0005. Durable and long lasting. Polished body to be smooth and rust resistant.
Save your time: The Collet Chuck Wrench is made of high carbon steel with anti-slip handle design. Easy to tighten and loosen the collet chuck holder to improve work efficiency.
High precision and stable performance: Extend the opportunity to use more router bits for both 1/8'' and 1/4'' shank in your CNC machine.
Wide Compatibility: Ideal tool set for most CNC milling machines in the market and DIY CNC routers, which are compatible with M Collet.
Three different collet chucks, collet clamping nuts and spanners included. Package including: 1* ER11-M Collet, 1* ER16-M Collet, 1* ER20-M Collet, 1* ER11-M Collet Clamping Nut, 1* ER16-M Collet Clamping Nut, 1* ER20-M Collet Clamping Nut, 1* ER11-M Type Collet Chuck Wrench, 1* ER16-M Type Collet Chuck Wrench, 1* ER20-M Type Collet Chuck Wrench.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder

~~$237.00~~ $198.00
SAVE $39.00

VIEW MORE

Genmitsu 4 Pack Hold Down Clamp Kit for PROVerXL 4030

This clamp can be used with a T-Slot Aluminum Spoilboard or Threaded MDF Spoilboard of Genmitsu PROVerXL 4030 CNC router kit. It provides exceptional clamping forces for your universal t-track system configurations and assemblies. This clamp system is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.

$198.00

VIEW MORE

2 reviews

CNC Dust Shoe for Φ69mm Spindle Motor of PROVerXL 4030

Compatibility: The Dust shoe is compatible with Genmitsu PROVerXL 4030 and other CNC machines with a 69mm diameter spindle. (Not compatible with the original Φ52mm spindle.)
Equipped with Nylon Brush for strong vacuum capability. High dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
Easy to use: Just simply put the motor into the motor hole and align the dust shoe with the spindle upwards, then fix the motor by tightening the screw.
Magnet Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Quickly pop off the nylon brush to change bits with the magnet design.
Fully Assembled: You can install it in your PROVerXL 4030 and enjoy your work with a clean workspace once you get it.

$435.00

New

VIEW MORE

5 reviews

6060 XY-Axis Extension Kit for PROVerXL4030

Level up your CNC: This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making MORE.
Compatibility: Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board & MDF Board will also be available soon.
Flexible Extension: You could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs.
Simple Assembly: We will take you through the assembly process every step of the way. You could find the Installation Guide located in our at the resource center.
Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend more on complicated assembly.

$2,757.00

VIEW MORE
10 Watt laser attachment (head) "Invincible" continuous power for laser cutting & engraving
The Endurance 10 Watt (10000 mW) laser “Invincible” module (add-on) with 445 nm wavelength for any 3D printer / CNC machine brings ultra abilities to your 3D printer or CNC machine.
- Laser Optical Power Impulse Output is 10000mW ± 15%.
- Has TTL (PWM) and allows different laser power output.
- High beam quality.
- Reliable and stable power output.
- A universal upgrade for your 3D printer / CNC machine or an XY plotter.
- Cut and Engrave on almost all surfaces.
- Compatible with most CNC frames and boards or 3D printers. (Compatiable with 3018 CNC & LE5040 Laser Engraver)
Note: This is a reselling product, payment will be direct to Endurance Lasers LLC.
~~$6,281.00~~ $4,306.00
SAVE $1,975.00

1
2
3
4