Widely Used: The attenuation rate is 10X/100X, widely used in any brand of an oscilloscope.

Maximum differential test voltage (DC+ACPK-PK): 70V (10X), 700V (100X). You can safely measure floating voltages up to 700V and have a bandwidth of up to 100 MHz.

Easier and Safer Use: High voltage differential probes sample high impedance isolation between input and output to protect personal safety. Power supply USB DC 5V output, more portable while Oscilloscope has a USB interface.

Versatile Kit: All 6 pieces with three different connectors help to test various on different occasions, including 2 alligator clips, 2 hook clips, and 2 pincer clips.

Applications: Floating Measurements, Switch-Mode Power Supply (SMPS), Motor Drive Design, Power Device Testing & Evaluation, Power Converter Testing & Design.

28 Mpts Memory Depth and ZOOM-Technology

The Micsig TO1000 series provides more accuracy and details of waveforms with 28Mpts memory depth and a ZOOM technology. The tBook mini can record a longer time period also.

Lower noise

Lower noise floor is less than 1mV help you to get more accurate measurements

31 Types of Auto Measurements

There are 31 auto measurements for the user to choose from on the measure selection page.
The tBook mini can measure and show 5 parameters simultaneously.

Multi-Level Intensity Grading Display

"Multi-Level Grading Intensity" display, extensive signal characteristics with a very large number of measurement values can also be displayed completely.

Full Touch control

The full-touch tablet of the tBook mini series turns it into a very compact oscilloscope.
In addition to the 7500 mAh battery, it is an ideal mobile handheld measurement device.

Intelligent

Under the network environment, you can operate the oscilloscope remotely via connecting the smartphone APP, which can help you observe the real-time waveform and data. If the Wi-Fi signal is stable, waveform and data transferring process make you work effectively.

Applications

The ATO1104 supports the various automotive diagnostic test: ignition, sensors, actuators, networks, charging circuit, starter circuit, communication test (including CAN, LIN, FlexRay, K, etc. ), and pressure test(cylinder pressure, intake and exhaust pressure, fuel pressure, etc. )

Simple to Use

Featured with an 8" full touch capacitive screen, the operation is simple and easy.

Easy Saving

The built-in 8 G memory storage makes saving and transferring waveform images, videos and data easier than ever.

Various I/O port

Wi-Fi, LAN, HDMI, USB Host, USB Device, GND, DC Power.

Durable

Premium materials and exquisite workmanship make this product durable.

Application

ACP1000 can work with digital multimeter, scopes and graphing meters, which is ideal for all high current applications.

Easy to Use

Clamp and ergonomic design allow operating easily with one hand, with functions of one-touch zero adjustment and low battery indication.

Precise Measurement

Allows test current range from 0.1A to 1000A, there is no need to disconnect the circuit-under-test, ensuring accurate screen displays.

Compatible

This is really a useful tool for testing and charging systems, with features of auto-ranging and data-hold, also compatible with most of the lab scopes and graphing multimeter.

• Lightweight and portable, easy to carry.
• Designed for the measurement of high voltage differential signal, to meet the demand for floating measurement.
• Power supply USB DC 5V output, more portable while Oscilloscope has USB interface.
• Simple design, it is easy and safe to use.
• Maximum differential test voltage (DC+ACPK-PK): 130V (50X), 1300V (500X)

Upgraded Version of DP10013

Micsig DP20003 is the upgraded Version of DP10013 and more powerful. Maximum Differential Test Voltage( DC + Peak AC) up to 5600V(DP10013: 1300V). Switchable attenuation: 200X, 2000X(DP10013: 50X, 500X)

Cost Effective

While Tektronix counterparts, such as P5200A P5205A P5210A, starts at $1,500, Micsig DP20003 offers the same specifications at a reasonable low price.

Portable

With portable and simple design, you can take the DP20003 to work anywhere with the small package box. Power supply USB DC 5V output, more portable while oscilloscope has USB interface.

Application

Designed for the measurement of high voltage differential signal, switching power supply design, motor drive design, electronic ballast design, CRT display design, power converter design and service, power device evaluation.

Precise Signal

With stable physical properties and high quality plug-in cards, you will get an accurate signal. But please note that a calibration is needed when a substantial change in temperature or other circumstances affect the accuracy of the probe's zero point. You can short the input terminals of the probe, then power the probe while simultaneously pressing the 200X and 2000X keys for 3 seconds.

Micsig high voltage differential probes DP series are designed for the measurement for high voltage differential signal, to meet the demand for floating measurement. It has 50MHz and 100MHz two models, and has two kinds of different attenuation ranges: 500X, indicate the maximum test voltage is 1300V; 50X presents maximum test voltage is 130V.

PC/Mobile Supported

Support mobile Android system and computer screens to watch waveforms, it makes measurement become more convenient. Just bring your phone and you can work anytime, anywhere.

Portable Design

Lightweight and portable design, easy to carry. With the USB 2.0 interface, it can be powered over the USB connection, plug, and play. You no longer need to grab an oscilloscope with your colleagues in the lab, and it is easy to carry on a business trip. You can test it whenever you have an idea.

New Architecture

With the new .net architecture, it is more stable and more beautiful, with more reliable compatibility.

Hardware Trigger Function

A single trigger can be carried out in all cases of sampling rate, and the sporadic aperiodic signal can be analyzed.

Paperless Recorder

Record voltage changes for a long time in 72 hours, generate curves, save data.

Color Display

The bright color display presents any measured AC current, including sine, square, sawtooth, and triangle waveforms.  

Simple to Use

Operation is simple and easy, using taps and swipes much like any smartphone.

Portable

Its small form factor conveniently fits inside any pocket so it’s always ready when you need it.

Easy Saving

The built-in 8 MB flash storage makes saving and transferring waveform images easier than ever.

Portable

The slim and compact design can fit perfectly inside your pocket, without losing any of the integral features found in a full-sized oscilloscope!

Powerful

System stores files in BMP, DAT, BUF, or CSV format. Uses a built-in flash disk to save/read waveform images. Math waveforms are as follows: DATA, -DATA, Inp+D, Inp-D, -Inp. Output test signal: 10Hz—1MHz (1-2-5 sequence step). Can be used in a wide range of environments including academic, electronic maintenance, electronic engineering, etc.

LCD Screen

The 2.8inch full-color TFT LCD screen provides a rich display for its smaller size.

Rechargeable

A built-in 500mAH rechargeable lithium battery provides power for your oscilloscope use, rechargeable through a mini USB port.

Large Storage

Comes with a built-in 8MB storage for saving waveform data and images!

DS212 is a 2-channel digital oscilloscope. It is in a new design - two gear for controlling, very convenient for testing. It supports USB flash disk storage and USB charging. It is widely applicable in the academic experiment, electronic maintenance, electronic engineering tasks, etc.

• New design - two gear for controlling, very convenient for testing.
• Pocket-size and lightweight.
• Chargeable lithium battery, 4 hours' working duration.
• Equipped with a 320*240 color display.

Upgrade Version

DSO213 is the latest oscilloscope in the family of SainSmart DSO oscilloscope. Compared with DSO203, DSO213 upgrades its analog bandwidth to 15MHz (DSO203 is 8MHz) and max sample rate to 100MSa/s (DSO203 is 72MSa/s)

Color Display

Equipped with a 3 inch 400x240 color display, it presents any measured AC current, including sine, square, sawtooth, and triangle waveforms.  

Simple to Use

Operation is simple and easy, just like play a smartphone.

Portable

Its small form factor conveniently fits inside any pocket so it’s always ready when you need it.

Easy Saving

The built-in 8 MB flash storage makes saving and transferring waveform images easier than ever.

OWON VDS series PC oscilloscope attracts more eyesight from the market upon with its ultra-thin body design - only 18mm of body depth, which is much portable, and its USB powering facilitates mobile tests under powerless conditions to the largest degree.

• 25MHz bandwidth, and 100MS/s real-time sample rate
• Friendly UI : FFT, or X-Y, and waveform 2 views displayed
• Multi-trigger option : edge, video, slope, pulse, and alternate
• USB bus powering, and LAN remote control (optional)
• Ultra-thin body design, easy portability

OWON witnesses the new-born USB oscilloscope working on PC - OWON VDS series oscilloscope in the new era. Especially for engineers. OWON VDS PC oscilloscope attracts more eyesight from the market upon with its ultra-thin body design - only 18mm of body depth, which is much portable, and its USB powering facilitates mobile tests under powerless conditions to the largest degree.

• Up to 100MHz bandwidth, and max 1GS/s real-time sample rate, 10M record length
• Friendly UI : FFT, or X-Y, and waveform 2 views displayed, on the same screen
• Multi-trigger option : edge, video, slope, pulse, and alternate
• USB isolation - less signal inference, more PC protection. USB bus powering, and LAN remote control (optional)
• Ultra-thin body design, easy portability

• Stackable 3-Way Banana Plug Test lead
• Length - 36"
• Color coded red and black leads
• Keep these handy leads ready for those special tasks
• Ideal for use in labs, service shops, schools, home and industry

Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability.

• Cost-effectiveness; Excellent industrial design.
• Dimensions (mm):205(L) x120(W) x35(H), be carried easily.
• One computer can connect many DSO, extend channel easily.
• Labview\VB\VC\Delphi\C++Builder Second Design instance.

Compact Design

Equipped with a rich 2.8" 320x240 TFT display and side thumbwheels allow for easy operation and navigation.

Wide Application

Analyze UART, I2C, SPI, and many other standard protocols accepted. This unit is specially designed for UART, SPI, I2C, and other communication debugging.

Portable

Its small form factor conveniently fits inside any pocket so it's always ready on the go!

Easy Saving

The built-in 8 MB flash storage makes saving images and transferring data easier than ever!

Simple to Use

Product instructions are provided, but if you have any more concerns, SainSmart provides more details in their wiki page and customer assistance with any questions that may arise!

• This case is designed to prevent dust, dirt, and lint from getting in.
• With this protective case, you needn't worry about your DSO accidental drops or wear.
• The silicone case is generally made of rubber, it is soft and flexible.
• Compatible with DSO213 ONLY. (Please confirm your DSO Model).