Shop Categories
CNC & Engraving
3D Printing
- — 3D Printers
- — Filaments
- — TPU
- — PLA
- — PETG
- — Wood
- — More Filaments
- — Resins
- — Accessories
Tools & Instruments
- — Soldering
- — Oscilloscopes
- — Repair Tools
- — Others
Explore
-
3 reviews
Genmitsu 1/8" Router Bit 10-PCS Flat Nose Set SS17, 1 Flute, Nano Blue Coating
- Number of Flutes: 1
- Cutting Edge Diameter (CED): 3.175mm (1/8") approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc
SainSmart Genmitsu CNC Router Bits Value Kit Now Available in Store. Learn More.
$237.00
-
1 review
Genmitsu 1/8" Router Bit 10-PCS Flat Nose Set SF17, 2 Flute, Nano Blue Coating
- Number of Flutes: 2
- Cutting Edge Diameter (CED): 3.175mm (1/8") approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
SainSmart Genmitsu CNC Router Bits Value Kit Now Available in Store. Learn More.
$158.00
-
1 review
Genmitsu 2-Flute Flat Nose Spiral End Mill, 1/8'' Shank, 0.8mm-3.175mm Cutting Diameter, FN10A
- High-quality Material: The end mills are made of tungsten carbide steel alloy that can keep continuous machining for 800 minutes.
- Nano Blue Coating: The end mills are Nano blue coating, which is high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Shank diameter: 1/8'' (3.175mm), cutting diameter: 0.8mm-3.175mm (0.8/1.0/1.5/2.0/2.0/2.0/2.0/2.5/3.175/3.175mm), cutting length: 4mm-22mm, overall length: 38mm.
- Applicable Materials: Suitable for such as wood, MDF, plastics, acrylic, aluminum, soft metal, etc.
- Versatile: Widely used for metalwork, toolmaking, model engineering, carving, cutting, engraving, milling, slotting, drilling, sculpting.
$158.00
-
Genmitsu 3-Flute Square End Mill for Aluminum Applications 7-Pack, 4mm Shank, SN07A
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Cost-Effective: Coming with 7pcs of the 3-flute square end mills, Shank Diameter: 4mm, Cutting Diameter: 1/1.5/2/2.5/3/3.5/4mm, Cutting Length: 4/4/5/6/8/10/12mm, Overall Length: 50mm.
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal; Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting.
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy; Attain excellent production rates thanks to the strong tooth with double relief angles.
Wide Compatibility: Genmitsu SN07A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$158.00
-
Genmitsu 3-Flute Square End Mill for Aluminum Applications 6-Pack, 1/4’’ Shank, SN06A
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 6pc of the6x 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm&20mm, Overall Length: 50mm.
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal; Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting.
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy; Attain excellent production rates thanks to the strong tooth with double relief angles.
Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$395.00
-
Genmitsu Standard Tooth M42-8% Cobalt Roughing End Mill 3-Pack, 1/4’’ Shank, 4-Flute, Coarse Tooth, CT03A
High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 3pcs of the Standard Tooth M42-8% Cobalt Nano Blue Coat Roughing End Mills, Shank Diameter: 1/4'' (6.35mm), Cutting Diameter: 6mm , Cutting Length: 15mm, Overall Length: 50mm.
Range of Processing: Used for aggressive machining. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut. Extremely hard, wear-resistant.
Wide Compatibility: The CT03A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$395.00
-
Genmitsu 1/8" Router Bit 10-PCS Ball Nose Set SB17, Nano Blue Coating
- Number of Flutes: 2
- Cutting Edge Diameter (CED): 3.175mm (1/8") approx.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc.
SainSmart Genmitsu CNC Router Bits Value Kit Now Available in Store. Learn More.
$198.00
-
1 review
Genmitsu 10pcs 2-Flute Ball Nose Spiral End Mill, 1/8'' Shank, 0.8mm-2.5mm Cutting Diameter, BN10A
High-quality Material: The end mills are made of tungsten carbide steel alloy that can keep continuous machining for 800 minutes.
Nano Blue Coating: The end mills are Nano blue coating, which is high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Shank diameter: 1/8'' (3.175mm), cutting diameter: 0.8mm-2.5mm (0.8/1.0/1.5/2.0/2.0/2.0/2.0/2.0/2.5/2.5mm), cutting length: 4mm-22mm, overall length: 38mm.
Applicable Materials: Suitable for such as wood, MDF, plastics, acrylic, aluminum, soft metal, etc.
Versatile: Widely used for metalwork, toolmaking, model engineering, carving, cutting, engraving, milling, slotting, drilling, sculpting.
$158.00
-
Genmitsu 1/8" Shank 4-PCS 2-Flute Tapered Ball Nose End Mills Bits Set, TB04A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm ttungsten steel that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm.
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best.
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$158.00
-
Genmitsu 2-Flute Tapered Ball Nose Spiral End Mill 4-Pack Set, 1/4" Shank, TB04B
High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with provides high hardness and heat resistance enablinges the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Cost-Effective: Coming with 4pcs of the 2-flute tapered ball nose spiral end mills, Shank Diameter: 1/4'' (6.35mm), Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 20mm, Overall Length: 50mm.
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models, and other other precision parts processing, these Tapered ball nose bits can do the best.
Applicable Materials: These Nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc.
Wide Compatibility: Genmitsu TB04B tapered ball nose spiral end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$395.00
-
Genmitsu Single Flute Spiral Upcut Cutter 5-Pack, 1/4'' Shank, SU05A
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality
Cost-Effective: Including 5pcs of the 1/4'' shank spiral upcut cutter, Shank Diameter: 1/4’’(6.35mm), Cutting Diameter: 6mm, Cutting Length: 12, 15, 17, 22, 25mm, Overall Length: 50mm.
Up-Cut Advantage: Upcut bits are preferable if you want to clear chips from your cuts to prevent overheating the bits. They are great for making cuts through the material. An up-cut is the most common type of cut.
Range of Processing: Used for Carving, Cutting, Slotting, Milling, Hollow Cutting in Materials Like Hardwood, Medium Density Board, Nylon, Resin, ABS, Acrylic, PVC, MDF, etc.
Wide Compatibility: Genmitsu SU05A spiral upcut cutter bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$356.00
-
Genmitsu 1/8" Shank 6-PCS Spiral Down Cut 2 Flute Tungsten Carbide Steel Alloy Milling Cutter Bit Set, SD06A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm Tungsten Carbide Steel Alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity, which provides longevity and produces cutting results of the highest quality.
Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles and dados, plunge cut leave with clean edge and top surface, better than straight bits.
Cost-Effective: It comes with 6PCS 2-flute spiral down-cut bits with different cutting length and overall length to meet your requirements. Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting length: 8-22mm (8/10/12/15/17/22mm), Overall length: 40-55mm (40/40/40/45/45/55mm)
Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.
Wide Compatibility: The SD06A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$237.00
-
Genmitsu Single Flute Spiral Downcut Cutter 3-Pack 1/4'' Shank, SD03A
High Quality: High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness, and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Down Cut Advantage: Downcutting bits press the chips and the material back into the cut, thus leaving a nice finish on the top surface of your material. Generally used for smoothly downcut groove and slots, mortises, cycles, and dados, plunge cut leaves with a clean edge and top surface, better than straight bits.
Cost-Effective: It comes with 3PCS of the single flute spiral down-cut bits with different cutting lengths and overall length to meet your requirements. Shank Diameter: 1/4''(6.35mm), Cutting Diameter: 1/4''(6.35mm), Cutting length: 12/17/22mm, Overall length: 50/60mm.
Applicable Materials: Perfect for cutting thin, flexible materials including aluminum, wood, plastic, laminated materials, and thin & flexible sheets, etc.
Wide Compatibility: The SD03A down-cut spiral bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$198.00
-
Genmitsu 1/8" Shank 5-PCS 2-Flute Compression Spiral Bits Up-down Cut Set, SC05A
High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Up&Down Cut Advantage: The compression bits (up-down bits) offers the benefits of both up and down cut bits. The bit is a standard down cut, but its tip is an up cutter. Therefore, when cutting materials like plywood, you will end up with a clean edge on both sides because the top is pushed down while the bottom is pulled up.
Cost-Effective: Including 5pcs 2-flute compression spiral bits, Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 12, 15, 25, 28, 32mm / Overall Length:40, 55, 60, 65mm.
Recommend Material: Laminates, composites, plywood, plastic, soft metal etc. Note that compression bits should never be used to drill deep holes.
Wide Compatibility: Genmitsu SC05A 2-Flute compression bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$316.00
-
8 reviews
Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8" Shank, PD30A
- High Quality: The PCB drill bits set are made of high-quality tungsten carbide steel alloy, which is high wear resistance, high hardness, anti-impairment. Seismic design on the blade edge enables it to stay stable during engraving.
- Various Sizes: 1/8'' shank; bits diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5m, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm. This Set contains 30 different size drill bits diameter, each size having 1 pcs.
- Advantage: With spiral flute cutting edge, these PCB drill bits can reduce cutting force and prevent the drill from broken and improve accuracy. They work quickly and cleanly, with no glitches or scrap left.
- Application: Suitable for amber beeswax, printed circuit boards, 3D printer nozzle cleaning, plexiglass, bakelite, CNC engraving, jewelry, plastic, and other precise drilling.
- 30-piece Combo Set: There are 3 sets of drill bits (Set A: 0.1mm-1.0mm; Set B: 1.1mm-2.0mm; Set C: 2.1mm-3.0mm), each of 10 pieces, and each set has a protective box. It's easy to store and carry.
$79.00
-
20 reviews
Genmitsu 1/8" Router Bit 10-PCS Variety Set C08/C15, Nano Blue Coating
- Cutting Edge Diameter: C08 Set, 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs.
- Cutting Edge Diameter: C15 Set, 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm), 10Pcs.
- Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing. Suitable for milling and cutting(PVC, PCB, acrylic)
SainSmart Genmitsu CNC Router Bits Value Kit Now Available in Store. Learn More.
$158.00
-
SS05A 5pcs Standard Spiral Router Bits Set, for Wood Working Acrylic MDF PVC ABS
High-quality Material: Made of tungsten carbide steel alloy. Get the most out of the life of your bit
Nano Blue Coating: Coated with a Nano blue coating, high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
Parameter: Shank diameter: 1/4'', cutting diameter: 1/4'' & 1/8'' , cutting length: 1/2''-1'', overall length: 2''-3''.
Applicable Materials: Suitable for such as wood, MDF, plastics, acrylic, aluminum, soft metal, etc.
Versatile: Widely used for metalwork, toolmaking, model engineering, carving, cutting, engraving, milling, slotting, drilling, sculpting.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$474.00
-
VG03A 1/4'' V Grooving Router Bit Set, for Acrylics, Plastics, Carbon fiber
High Quality: These V groove router bits are made with premium tungsten carbide steel alloy, a highly durable material that is guaranteed to withstand the test of time.
Cost-Effective: Each set includes 3pcs of the V groove router bits and 1pcs of 12mm to 6mm Router Collet. Shank diameter: 1/4''(6.35mm), cutting diameter: 1/2''(12.70mm)、0.39''(10.00mm).
Versatile: V-Groove Bit is designed to cut deep or shallow V grooves. The bit is great for sign making or for adding decorative accents to furniture and plaques. With good milling, cutting performance, ensure high efficiency.
Compatible Materials: These router bits are mainly used for acrylics and plastics, carbon fiber, chipboard, laminated veneers, MDF, PCB, solid surface, wood and wood composite materials.
Wide Compatibility: The VG03A router bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$237.00
-
WC04A 4Pcs CNC Wood Carving Router Bits Set, 1/4'' Shank, 15° Detail carving liner, 20° Profile bit, 60° & 90° V groove
High Quality: Made of Premium Tungsten Carbide Steel Alloy. That's great for milling and cutting performance, ensuring that our bits stay sharp and provide nice clean cuts. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break.
Efficient Cuts: This wood carving set comes with 4 PCS, 1/4” shank router bits. 1PCS 20° profile bit for etching and outlining; 1PCS 15° carving liner for fine lines and details; 60° & 90° V groove bits for multiple background depths.
Shank diameter: 1/4''(6.35mm), cutting diameter: 0.2mm, overall length: 50mm
Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, plywood, organic board, etc. Highly recommended for wood carving. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling.
Wide Compatibility: Genmitsu WC04A Wood Carving Router Bits Set are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$316.00
-
MC10A 10Pcs Strong Durable CNC Router Bit Collection for General Purpose, 1/4'' Shank
High Durability & Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more.
Much Stronger, Lasts Longer: Specially designed for General Purpose, comes with 10 PCS in different types, designed to meet your needs. Shank diameter: 1/4''(6.35mm)
Applicable Materials: Suitable for Aluminum, Brass, Bronze, Copper & Titanium, Aluminum Composite Material (ACM), Composite, Fiberglass, Graphite, MDF/HDF, Plastic, PVC & Acrylic, Plexiglas, Sign Foam, Sign Board & HDU, Wood, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling.
Wide Compatibility: Genmitsu MC10A are compatible with most desktop CNC machines, such as the Genmitsu PROVerXL 4030, Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$1,865.00
-
SN05A 5Pcs CNC Router Bits End Mill Set, for Steel and Iron
Variety Pack: 5 different end mills with different cutting diameters and different cutting lengths.
Good Appearance: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
High Quality: Using tungsten carbide steel alloy, with good milling and cutting performance.
Wide Application: Great for side milling, end milling, finish machining, etc. Suitable for carbon steel, alloy steel, pre hardened steel, hardened steel, cast iron, etc.
Compatibility: Genmitsu SN05A CNC router bits set are compatible with most desktop CNC machines, such as the Genmitsu PROVerXL 4030, Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$182.00
-
EM10B 10Pcs CNC Router Bits End Mill Set, 1/8" Shank for Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood
Variety Pack: Including 3 different 1/8'' shank 4pcs single-flute end mills, 4pcs ball nose end mills and 2pcs 60° v-groove end mills.
Cost-effective: With 10pcs a set, it's cost-effective for the CNC makers. Come with a portable plastic case, each is stored in an individual section, the set is easy for storage and carries.
High Quality: Using tungsten carbide steel alloy, with good milling and cutting performance.
Wide Application: Great for Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood and other three-dimensional sculpture, surface machining, etc.
Compatibility: Genmitsu SN05A CNC router bits set are compatible with most desktop CNC machines, such as the Genmitsu PROVerXL 4030, Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$143.00
-
CS05A 5Pcs Corn Cob Miiling Cutter CNC Router Bits End Mill Set, 1/4" Shank
Cutting Diameter: 1/4 inch; Cutting Length: 22/25/32/42/52mm, 5Pcs; Overall Length: 50/50/60/70/80mm
High Quality & Great Durability: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more.
Lasts Longer, Cost-Effective: Specially designed for general purpose, comes with 5 PCS in cutting length, designed to meet your needs.
Applicable Materials: Suitable for PCB, SMT, CNC, MDF, ABS, PVC, Mold, acrylic, nylon, resin, plastic fiber, carbon fiber, density board, hardwood, plywood, printed circuit board, and other precision parts processing and milling.
Wide Compatibility: Genmitsu CS05A are compatible with most desktop CNC machines, such as the Genmitsu PROVerXL 4030, Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$711.00