Large Volume: With a build volume measuring 7.5in x 4.7in x 7.9in (192mm×120mm ×200mm), the Flashforge Foto is capable of printing larger props and tabletop figures.

Uniform Light Distribution: A unique light matrix provides more uniform UV distribution, making for a high level of precision.

Sharp Details and Super Precise: Features an Ultra High Definition 8.9-inch 4K LCD with 3840 x 2400 resolution, the Flashforge Foto has a XY resolution of 50 microns and layer height down to 25 microns for ultra-detailed prints. A combination of a dual linear rail and anti-backlash assembly, make the Foto even more reliable.

Speedy Mono-LCD Printing: The monochrome LCD display in the Foto enables it to print at a maximum speed of 60mm/h, 300% faster than its predecessors.

Prolonged LCD Lifespan: The Monochrome LCD screen on the Foto excels its RGB counterparts at lifespan, replacement is not required before thousands of hours of use. The Foto is also equipped with an effective UV cooling system to prolong the screen life even further, all that combined brings down the overall maintenance cost of the machine.

Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, the 3DPrintMill enables you to print “infinitely” on the Z-axis for large prints or production lines producing smaller parts, making it a highly productive mini-factory right on your desk.

Rolling Conveyor Belt: The wear-resistant conveyor belt on the 3DPrintMill features excellent layer adhesion. In addition, prints will fall off automatically when they reach the belt ends, making it a smoother workflow for you to print continuously.

Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing experience.

Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools, combined with the 45 degrees slanting nozzle, the 3DPrintMill is capable of 200 hours of continuous printing.

Exclusive 3DPrintMill Slicer: Specially designed slicer CrealityBelt is available for download. It prioritizes ease of use and thus makes it easier for you to explore this brand new belt printer.

• Join our SainSmart 3D printing community

Go Big without breaking your budget

With a build volume measuring 300mm * 300mm * 340mm, the new Creality Ender-3 MAX allows you to print large projects in one go.

Larger but easier to build

The Ender-3 MAX comes large, and with the pre-assembled gantry and base, it is the largest and easiest to build model of the Ender family so far.

Enhanced Extruder

The upgraded all-metal extruder on the Ender-3 MAX is more rigid and less susceptible to wear and tear, enabling smooth extrusion and longevity.

Dual Fan Cooling

Better heat dissipation reduces the chances of filament blockage and improves the overall printing precision.

TMC 2208 Silent Driver

The Ender-3 MAX has TMC 2208 Silent Drivers in both X-axis and Y-axis, which brings down the annoying printing noise, suitable for home and school use.

32-bit Board with TMC2225 Silent Drivers

BIQU B1 has a SKR V1.4 32-bit mainboard, in combination with the silent TMC2225 stepper drivers, this printer will deliver quiet and consistent results time after time.

Quality Printing

The all-metal extruder on the BIQU B1 enables smooth extrusion and longevity, in combination with the dual fan cooling duct to produce quality prints. Print area 235 x 235 x 270 mm

Spring Steel Bed

The B1’s spring steel bed has a textured surface, which allows for excellent bed adhesion and easy removal of prints. The bed is also reversible, so that printing can be done on both sides, prolonging the service life.

A 3D Printer for Beginners and Experts

With a 4.3-inch color touchscreen and dual user interface, the B1 offers some beginner-friendly features for easy calibration and setup, as well as countless features for advanced users to get most out of their printer!

More options for upgrades

The BIQU B1 offers extra connection slots and interfaces for you to upgrade the printer with ease. No firmware update needed! It supports adding BL-Touch, WiFi connectivity, and the BTT Smart Filament Sensor.

• YOU MAY ALSO LIKE: BLTouch Auto Bed Leveling Sensor Kit | BIQU H2 Extruder | SKR Mini E3 V2.0 Silent Control Board

Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 200 - 220°C; Recommended platform temperature: 40 - 60°C

TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible

Compatible with all FDM printers on the market which accept 1.75 mm filament; Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, and other RepRap printers

With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp

Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more.

• Buy Two Together to Get Free Shipping in US.
• Nylon+ Carbon Fiber |  Silk PLA |  PETG |  Neon Color TPU | Filament Storage Bag

Filament Diameter 1.75 mm; Dimensional Accuracy +/- 0.02 mm; 1 KG (approximately 2.20 lbs) per Spool; Vacuumed Sealed With Desiccant; Recommended Extrusion/Nozzle Temperature: 190 - 215 °C.

Gorgeous color with sheen  The lustrous color of this Silk PLA adds a shiny touch to your parts, and with strict quality control, you are able to get the exact same colors from spools to spools.

Perfect winding for perfect result Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results.

Top-notch +/- 0.02 mm dimensional accuracy Throughout the manufacturing process, we use laser guided optical micrometers to measure filaments, thus bringing consistent printing performance for each print of yours.

Manufactured with premium material in dry and dust-free environment, this filament contains no impurities and bubbles; The vacuumed sealed package also keeps the filament away from any form of dampness or air.

The Nylon Filament Blended with Carbon Fiber is an incredibly strong and durable material, which is very suitable for printing functional parts such as gears or engineer design prototypes.

• We use new formula to improve its rigidity and print performance: 75% nylon coupled with 25% carbon fiber.
• It features with lower shrink rate, higher strength and rigidity, less warpage and more resistant to wear and tear comparing to the traditional nylon filament.
• It is suitable for those looking to make both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.
• Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles.

▶ Improve your print quality with the most powerful 3D printing software available. Simplify3D provides complete control over your print settings, making it easier than ever to create high-quality 3D prints. Start up quickly with pre-configured settings optimized for your 3D printer, review a simulation of your build sequence in the Preview Mode and begin your 3D print with confidence. Total control means amazing 3D prints!

▶ The software is cross-platform and can be installed on Windows, Mac OS X, or Linux systems

▶ System Requirements: Intel Pentium 4 or higher processor, 2GB or more of RAM. Windows XP or greater, Mac OS X 10.6 or greater, Ubuntu Linux 12.10 or greater. OpenGL 2.0 capable system. An internet connection is required for the installation and continued use of the software.

▶ The software is viewable in English, German, Spanish, Japanese, French, or Italian.

▶ The product is an electronic download that is emailed after your purchase via Simplify3D official.

Tips: License purchase is non-refundable. The license key will be emailed to you within 12 hours.

Comprehensive Vacuum Storage Kit: The state of the filament you use is the key to the quality of your prints, the eVacuum 3D Printer Filament Storage Kit allows you to keep your filaments in tip-top shape with ease.

Protects from Moisture: Durable vacuum compression bags, heavy-duty valve, and double seal zipper for airtight protection.

Easy Monitoring: Clear vacuum bags, together with cobalt-free humidity indicator cards enables you to have a quick view of the humidity level of your filaments without opening the bags.

The humidity indicator cards can be reused after drying with an oven or hair dryer.

Bag Size: 30cm × 40cm (11.81" × 15.75"); 40cm×40cm (15.75”×15.75”); It can be adapted to 0.5KG/0.75KG/1KG package of 1.75mm/2.85mm/3mm filaments.

Easy Installation and Upgrades: This SKR E3 Mini V2.0 Board + TFT35 E3 V3.0 Screen combo makes installation and upgrades easier. No firmware modifications are required and with built-in support for upgrades like BL-Touch, filament detection, power-off detection, automatic shutdown, this combo just makes your 3d printing life easier.

Quiet: The TMC2209 stepper motor drivers, with the StealthChop feature can get rid of the annoying noise from the stepper motors, allowing for quieter printing.

Dual printing methods: You can now print your projects via SD Card and USB Stick.

Touchscreen functionality and Dual UI: Responsive 3.5“ touchscreen with bright and sharp color. Add support for the latest marlin mode and BIQU touch mode to your printers, enabling you to get the best of both worlds.

High Performance: Both the board and the screen use a 32-bit board that enables your printer to be more responsive and accurate, making your printer more future-proof by supporting the latest firmware and upcoming features.

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.

Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size.

Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.

Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed.

Compatibility & Application: The laser module is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo.

Ease of Use: Much simpler assembly, plus with the auto bed leveling feature, this CR-6 SE brings you an unrivaled out of box experience to date.

A Quiet Beast: 32-bit silent motherboard, ATmega2560 control chip, and 24V 350W MeanWell power supply enable the CR-6 SE to heat up quickly and reduce noise consistently.

Professional Performance: Robust aluminum frame, dual lead screws and adjustable timing belt contribute to the smooth finish of the prints.

More Practical Add-ons: Flexible hotbed fixator, foldable filament holder, stepper motor cover...All you need is within reach.

Smooth Printing Experience: The newly-designed extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal. It is also equipped with the filament run-out sensor and resume printing function.

Authentic ANTCLABS BL-Touch V3.1: One of the most accurate and reliable leveling sensors available.

Make 3D Printing Easier: A properly leveled bed is fundamental to decent quality prints. BL-Touch is an auto leveling sensor for your 3D Printers, it makes it possible for you to calibrate your printers with ease, getting you off to a great start.

Wide Compatibility: As the most popular bed leveling solution on the market, the ANTCLABS BL-Touch has great compatibility with a wide variety of controller boards. You can use it on the SKR Mni Board and any printer with stock BL-Touch interface.

The BL-Touch Kit comes with an 80 cm extension cable, which adds up to a total length of approximately 95cm, please confirm whether it will fit your printer before purchase.

Note: This kit does not comes with BL-Touch Bracket, you need to buy or print it separately.

Verbesserter Extruder: Das Extrudersystem des FLASHFORGE Adventurer 3 enthält zur Verbesserung der allgemeinen Stabilität einen Turbolüfter mit entsprechender Führung des Luftstroms sowie einen praktischen Schnellverschluss, mit dem Sie die Druckdüse beispielsweise zur Reinigung kinderleicht entfernen können, ohne die gesamte Baugruppe zerlegen zu müssen. In nur 60 Sekunden heizt der Extruder dabei von Zimmertemperatur auf bis zu 200°C auf.
Ohne Nivellierung: Dies bedeutet, dass das beheizte Druckbett sehr flach ist und gewährleistet, dass die bei jeder Druckvorbereitung stets waagerecht ausgerichtet ist. Außerdem besteht das herausnehmbare Heizbett aus einem formbeständigen Material das dennoch biegsam genug ist, um das gedruckte Objekt spielend leicht abzulösen.
Filamenterkennung: Der FLASHFORGE Adventurer 3 verfügt über eine integrierte Filamentkassette, die das Filament erkennt und automatisch in den Drucker einführt. Es wird automatische unterbrochen, wenn das Filament ausgeht oder abbricht.
Fernüberwachung: Ein faszinierender Bestandteil dieses Druckers ist die integrierte 2MP HD-Kamera. Auf diese Weise können Sie Ihre 3D Ausdrucke in Echtzeit über FlashCloud, die cloudbasierte 3D-Druckerverwaltungssoftware, fernüberwachen.

Cloud Drucken: Instructions | More Info

Water Washable: The MOR Water Washable Resin makes resin curing easy and straightforward, simple rinsing and soaking can help you get the excessive resin cleaned up
Optimized for Monochrome LCD 3D Resin Printers: With particular optimization for monochrome screen, The MOR resin allows you to print fast with excellent  finishing quality and level of details.

Non-brittle All-arounder: The MOR resin is specifically designed to have a little bit of flex, so that they can withstand bumps or drops, making it a versatile resin for different applications of printing.

Low Odor: As a carefully formulated resin with quality material, odor of the MOR resin is barely noticeable, which gives you a more comfortable printing experience.

Designed, Mixed, and Bottled in Las Vegas, Nevada, USA

• Limited Quantities - Shipping Immediately to USA

• Filament Diameter: 1.75 mm; Shore Hardness: 92A; Dimensional Accuracy +/- 0.04 mm;1 kg (approximately 2.2 lbs) per Spool; Vacuumed Sealed with Desiccant; Recommended extruder temperature:195 - 230°C; Recommended platform temperature: 40 - 60°C
• Compared to 95A filament, this 92A TPU Filament exhibits the following properties: higher elongation and abrasion resistance, better elasticity with highly reversible deformation and rebound resilience.
• Low warping and stringing, resistance to oils, greases. Printing 92A Filament requires more tweaking than the 95A ones, but with the profile provided by us (find the product description below), printing with it would be much easier.
• Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including SainSmart x Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.
• 92A TPU Filament can be used to produce elastomer parts like protective covers and vibration dampeners, widely used in the sectors of electronics, automotive, consumer goods, and sports equipment.

Filament Diameter 1.75 mm; Dimensional Accuracy +/- 0.02 mm; 1 KG (approximately 2.20 lbs) per Spool; Vacuumed Sealed With Desiccant; Recommended Extrusion/Nozzle Temperature: 190 - 215 °C.

Gorgeous color with sheen  The lustrous color of this Silk PLA adds a shiny touch to your parts, and with strict quality control, you are able to get the exact same colors from spools to spools.

Perfect winding for perfect result Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results.

Top-notch +/- 0.02 mm dimensional accuracy Throughout the manufacturing process, we use laser guided optical micrometers to measure filaments, thus bringing consistent printing performance for each print of yours.

Manufactured with premium material in dry and dust-free environment, this filament contains no impurities and bubbles; The vacuumed sealed package also keeps the filament away from any form of dampness or air.

Filament Diameter 1.75 mm; Dimensional Accuracy +/- 0.02 mm; 1 KG (approximately 2.20 lbs) per Spool; Vacuumed Sealed With Desiccant; Recommended Extrusion/Nozzle Temperature: 190 - 215 °C.

Gorgeous color with sheen  The lustrous color of this Silk PLA adds a shiny touch to your parts, and with strict quality control, you are able to get the exact same colors from spools to spools.

Perfect winding for perfect result Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results.

Top-notch +/- 0.02 mm dimensional accuracy Throughout the manufacturing process, we use laser guided optical micrometers to measure filaments, thus bringing consistent printing performance for each print of yours.

Manufactured with premium material in dry and dust-free environment, this filament contains no impurities and bubbles; The vacuumed sealed package also keeps the filament away from any form of dampness or air.

• Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.
• Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 195 - 230°C; Recommended platform temperature: 40 - 60°C
• SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.
• Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.
• TPU filament is very versatile and it is therefore widely used in 3D printing. With it, you can make your own FPV drone parts, Playstation cover/skin, phone cases, phone stands, toys and so on.

• Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.
• Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 195 - 230°C; Recommended platform temperature: 40 - 60°C
• SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.
• Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.
• TPU filament is very versatile and it is therefore widely used in 3D printing. With it, you can make your own FPV drone parts, Playstation cover/skin, phone cases, phone stands, toys and so on.

• Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.
• Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 195 - 230°C; Recommended platform temperature: 40 - 60°C
• SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.
• Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.
• TPU filament is very versatile and it is therefore widely used in 3D printing. With it, you can make your own FPV drone parts, Playstation cover/skin, phone cases, phone stands, toys and so on.

• Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.
• Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 195 - 230°C; Recommended platform temperature: 40 - 60°C
• SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.
• Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.
• TPU filament is very versatile and it is therefore widely used in 3D printing. With it, you can make your own FPV drone parts, Playstation cover/skin, phone cases, phone stands, toys and so on.

• Electrifying and intense, solid neon colors inject excitement and inspiration into designs. Enliven your work with these neon color filaments.
• Filament Diameter: 1.75 mm; Shore Hardness: 95A; Dimensional Accuracy +/- 0.05 mm; 0.8 kg (approximately 1.76 lbs) per spool; Vacuumed sealed with desiccant; Recommended extruder temperature: 195 - 230°C; Recommended platform temperature: 40 - 60°C
• SainSmart TPU filament is renowned for its high quality and ease of use, offering you flexible and strong parts with consistency and smooth finish.
• Compatibility: It is compatible with most FDM printers on the market that use 1.75 mm filament, including Creality, Prusa i3, Monoprice MakerSelect & Qidi, and other RepRap printers.
• TPU filament is very versatile and it is therefore widely used in 3D printing. With it, you can make your own FPV drone parts, Playstation cover/skin, phone cases, phone stands, toys and so on.

Thermoplastic polyurethane (TPU) is a high strength flexible filament.

This cost-effective 50g TPU is great for experimenting, printing items such as flexible phone cases, drone parts, and adding a little splash of color to your prints

• 1.75mm 50g per spool
• Specially formulated plastic with an increased amount of flexibility, with the rigid structure.
• Resistant to oil, grease, and abrasions.
• Recommended extruder temperature: 210 - 230°C Recommended platform temperature: 30 - 40°C
• Flexible Filament does not feed well on all 3D printers. Direct feed extruder is recommended.
• Vacuum-sealed packaging