Shop Categories
CNC & Engraving
3D Printing
- — 3D Printers
- — Filaments
- — TPU
- — PLA
- — PETG
- — Wood
- — More Filaments
- — Resins
- — Accessories
Tools & Instruments
- — Soldering
- — Oscilloscopes
- — Repair Tools
- — Others
Explore
FILTER BY
Material
-
5 reviews
6060 XY-Axis Extension Kit for PROVerXL4030
Level up your CNC: This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making MORE.
Compatibility: Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board & MDF Board will also be available soon.
Flexible Extension: You could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs.
Simple Assembly: We will take you through the assembly process every step of the way. You could find the Installation Guide located in our at the resource center.
Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend more on complicated assembly.
$2,757.00
-
[Replacement] 3018 Series CNC Router Plate Clamp for 3018-PRO, 3018-PROVer
- Original 3018 Series CNC Router Plate Clamp for Genmitsu 3018-PRO & 3018-PROVer.
- More replacements are available here.
$79.00
-
[Replacement] USB disk for Genmitsu 3018-PRO
- Original USB disk for Genmitsu 3018-PRO.
- More replacements are available here.
$79.00
-
[Replacement] 3018-PRO Accessories Screws Kit & Anti-Backlash Spring
- Original Accessories Screws Kit & Anti-Backlash Spring for Genmitsu 3018-PRO.
- More replacements are available here.
$48.00
-
[Replacement] 3018-PRO T-Nut 30M5
- Original T-Nut 30M5 for Genmitsu 3018-PRO.
- More replacements are available here.
$56.00
-
1 review
[Replacement] 3018-PRO Coupling & Screw Set
- Original Coupling & Screw Set for Genmitsu 3018-PRO.
- More replacements are available here.
$40.00
-
CNC Aluminum Vacuum Table for 3018-PROVer Series
The vacuum table is solid aluminum, which has high stability and excellent suction to help prevent warping. It is perfect for engraving thin materials or workpieces that require high precision.
No clamps are required when engraving so you avoid clamp/mount scratches and bumps that may be created by improper operations. Also, you could save your engraving material since you don’t need to set aside space for installing the clamps.
Works well with a properly sized vacuum pump. A perfect match Vacuum Pump is also available.
Easy to use, apply the suction tape to accommodate your stock material. We suggest you lay pieces of paper to cover the unused portion, then turn on the vacuum pump.
Perfectly compatible with Genmitsu 3018PROVer; 3018-PROVer mach3. You can use it to replace the original spoilboard of the machine.
You May Also Like: KABA CNC Enclosure | 300W Spindle Motor | Aluminum Spindle Holder
- Pre-order now, estimate ship out in the end of August.
$790.00
-
[Replacement] Acrylic Baffle for 3018-PROVer
- Original Acrylic Baffle for Genmitsu 3018-PROVer.
- More replacements are available here.
$158.00
-
[Replacement] Limit Switch Cables for 3018-PROVer
- Original Limit Switch Cables for Genmitsu 3018-PROVer.
- More replacements are available here.
$79.00
-
[Replacement] Stepper Moter Cable & Spindle Cable for 3018-PROVer
- Original Stepper Moter Cable & Spindle Cable for Genmitsu 3018-PROVer.
- More replacements are available here.
$79.00
-
[Replacement] Clamp Set for 3018-PROVer
- Original Clamp Set for Genmitsu 3018-PROVer.
- More replacements are available here.
$48.00
-
[Replacement] ER11 1/8'' Collet for 3018-PROVer
- Original ER11 1/8'' Collet for Genmitsu 3018-PROVer.
- More replacements are available here.
$32.00
-
[Replacement] Limit Switches (XY) for 3018-PROVer
- Original Limit Switches (XY) Collet for Genmitsu 3018-PROVer.
- More replacements are available here.
$48.00
-
[Replacement] Limit Switches (XY) for 3018-PROVer
- Original Limit Switches (XY) for Genmitsu 3018-PROVer.
- More replacements are available here.
$48.00
-
1 review
[Replacement] Control Board for 3018-PROVer
- Original Control Board for Genmitsu 3018-PROVer.
- More replacements are available here.
$316.00
-
3 reviews
[Replacement] X-Z Axis Assembly for 3018-PROVer
- Original X-Z Axis Assembly for Genmitsu 3018-PROVer.
- More replacements are available here.
$395.00
-
CNC Router Bits Collet Set, ER11-M, ER16-M, ER20-M
Durable Design: The collets are made of high-quality alloy spring steel material. High accuracy and it can be up to 0.0005. Durable and long lasting. Polished body to be smooth and rust resistant.
Save your time: The Collet Chuck Wrench is made of high carbon steel with anti-slip handle design. Easy to tighten and loosen the collet chuck holder to improve work efficiency.
High precision and stable performance: Extend the opportunity to use more router bits for both 1/8'' and 1/4'' shank in your CNC machine.
Wide Compatibility: Ideal tool set for most CNC milling machines in the market and DIY CNC routers, which are compatible with M Collet.
Three different collet chucks, collet clamping nuts and spanners included. Package including: 1* ER11-M Collet, 1* ER16-M Collet, 1* ER20-M Collet, 1* ER11-M Collet Clamping Nut, 1* ER16-M Collet Clamping Nut, 1* ER20-M Collet Clamping Nut, 1* ER11-M Type Collet Chuck Wrench, 1* ER16-M Type Collet Chuck Wrench, 1* ER20-M Type Collet Chuck Wrench.
You May Also Like: Milling Bit Storage Tray | ER11 Spring Collet Set | Collet Holder
$237.00$198.00SAVE $39.00
-
Vaccum Pump for CNC Aluminum Vacuum Table
With a strong pure copper motor, the vacuum pump works with high suction power and produces low noise. It has a long service life of about 1,000 hours. It can move air quickly and pulls a strong vacuum in no time.
- Quick Installation, the motor holder is included. The diameter of the holder screw hole is 23mm.
- Easy maintenance, no lubricant required and it will not pollute the environment.
- Compatible with Genmitsu CNC Aluminum Vacuum Table perfectly. Also, it is suitable for most DIY projects or vacuum adsorption automation equipment.
You May Also Like: KABA CNC Enclosure | 300W Spindle Motor | Aluminum Spindle Holder
$316.00
-
CNC MDF Spoilboard with Scale Grid for 3018 CNC Router
This MDF spoilboard is redesigned with scale 1-cm grids and 24 holes to fit most sizes of clamps, which is flexible for your configuration. The size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in), it is compatible with most 3018 CNC routers on the market. (eg. Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3)
A spoilboard is a disposable workbench mounted above the router’s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
You May Also Like: Hold Down Clamps | Z-Axis Touch Probe | KABA Enclousre
US order estimate ship out in the middle of August.
$198.00
-
CNC Dust Shoe ABS Cover Cleaner, for 3018 Series CNC Router Φ42mm Spindle Motor
This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
- US orders will be shipped at the end of Augst.
- Other countries and regions will be shipped in the early of Sept.
$158.00
-
2PCS T-Track Mini Hold Down Clamp Kit, for wood working on PROVerXL 4030
- Application: Great upgrade from the standard clamps included with Genmitsu PROVerXL 4030 or CNC 3040 series and other DIY CNC’s. It can be used on the MDF spoildboard and the aluminum spoildboard that fits the size of the M6 T-slot nut (16 x 16mm).
- Dimensions: 99mm length x 20mm width x 70mm height. (3.9 x 0.8 x 2.8in)
- Working range: The clamp accommodates materials up to 50mm (1.97'') thick and features easy to tighten knobs for quick installation or removal of stock material.
- Sturdy Quality: Constructed of High Strength 6061 Aluminum Alloy with high durability and wear resistance.
- Versatility: Spring loaded and capable of exceptional clamping force, this is a perfect addition to any universal t-track system configuration or assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
$198.00
-
Genmitsu Diamond Dresser Pen
Raw Material
Made of diamond and high-speed steel, with good abrasion resistance and high strength. 1/8" Shank, 2" Overall Length.
High Performance
With preferred quality, repeatable dressing performance, the Genmitsu Diamond dresser pen helps you work effectively.
Suitable for Grinding Wheel 46-60#
The handheld diamond dresser is suitable for dressing all types of grinding wheels of all types, such as brown corundum, silicon carbide, white corundum and many others.
Application
Perfect for truing and dressing of abrasive grinding wheels, trimming and polishing products, removing burrs, or carving the decorative pattern of ceramic.
Additional Functions
The Genmitsu diamond dresser pen is compatible with CNC machines for drilling, trimming, and carving. Compatible with Genmitsu 3018 series CNC machines.
$79.00